• MON-FRI 8am-6pm EST  |  SAT - SUN Closed

Adjust-A-Jaw Adjust-A-Jaw Tensioner


 *Require Swaging a Ferrule to the cable.

You can use our Invisiware® fixed tabs or threaded tabs or lag eyes to mount Adjust-A-Jaw® tensioners to your end posts. Or you can mount them using flat bar or angle iron welded to your post with holes drilled to accept the clevis. See the tabulated drawing and chart below to determine how this fitting interfaces with your end post.

The clevis has a male thread that mates with the female thread within the body of the tensioner. The swaging ferrule is swaged onto the cable and holds the cable inside the body. The body rotates on the cable and provides a considerable amount of take-up during tensioning with an open-end wrench. After tensioning, the lock nut locks the assembly in place.


Material/Finish
Cable
SKU
Description
Price
Qty
Unit Measure

Satin Stainless Steel 316
1
1/8" Or 3/16"
A-J62
Ships within 24-48 hours
Local pickup available
Adjust-A-Jaw Tensioner Stainless Steel 316. For 1/8" Cable use F-4 Ferrule. For 3/16" Cable use F-6 Ferrule. Use SC-6 Screw.
$55.31
1
1/4"
A-J82
Ships within 24-48 hours
Local pickup available
Adjust-A-Jaw Tensioner Stainless Steel 316. For 1/4" Cable. Use with F-8 Ferrule and SC-8 Screw.
$69.10
1
5/16"
A-J122
Ships in 1-2 days

Adjust-A-Jaw Tensioner Stainless Steel 316. For 5/16" Cable. Use with F-10 Ferrule and SC-8 Screw.
$142.98