Shopping Cart (
KK63 - Angle Base Flange
| Material/Finish: Galvanized Steel |
This fitting is similar to KK62, but is used to set up the upright at an angle between 45° to 60°. This fitting should only be subjected to light loads, which cannot be positioned at 90° to the applied load. For greater loads or other pipe sizes, a KK62 flange is used and the upright bent to the required angle. Ø indicates diameter of fixing holes.
| Part | Wt | A | D | E | F | G | H | dia fix holes |
| 63-6 | 2 lbs. | 6 | 2.99 in. | 5 in. | 3.62 in. | 3.74 in. | 0.31 in. | 0.55 in. |
| 63-7 | 2.57 lbs. | 7 | 2.99 in. | 5.43 in. | 3.74 in. | 4.17 in. | 0.39 in. | 0.55 in. |
| 63-8 | 3.37 lbs. | 8 | 3.5 in. | 6.1 in. | 3.94 in. | 4.53 in. | 0.39 in. | 0.55 in. |
1
| Material/Finish | Pipe Size | SKU | MFR Part No | Description | Price | Qty | Unit | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Galvanized Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1" IPS | KK63-6 Ships within 24-48 hours, Local pickup available | 63-6 |
[KK63-6] KK63 - Angle Base Flange (1" IPS)
Spec Sheet
|
$ 53.83 |
EACH |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1-1/4" IPS | KK63-7 Ships within 24-48 hours, Local pickup available | 63-7 |
[KK63-7] KK63 - Angle Base Flange (1-1/4" IPS)
Spec Sheet
|
$ 67.02 |
EACH |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1-1/2" IPS | KK63-8 Ships within 24-48 hours, Local pickup available | 63-8 |
[KK63-8] KK63 - Angle Base Flange (1-1/2" IPS)
Spec Sheet
|
$ 85.34 |
EACH |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
This fitting is similar to KK62, but is used to set up the upright at an angle between 45° to 60°. This fitting should only be subjected to light loads, which cannot be positioned at 90° to the applied load. For greater loads or other pipe sizes, a KK62 flange is used and the upright bent to the required angle. Ø indicates diameter of fixing holes.
| Part | Wt | A | D | E | F | G | H | dia fix holes |
| 63-6 | 2 lbs. | 6 | 2.99 in. | 5 in. | 3.62 in. | 3.74 in. | 0.31 in. | 0.55 in. |
| 63-7 | 2.57 lbs. | 7 | 2.99 in. | 5.43 in. | 3.74 in. | 4.17 in. | 0.39 in. | 0.55 in. |
| 63-8 | 3.37 lbs. | 8 | 3.5 in. | 6.1 in. | 3.94 in. | 4.53 in. | 0.39 in. | 0.55 in. |