Shopping Cart (
1
KK63-8
KK63 - Angle Base Flange
Ships within 24-48 hours, Local pickup available
This fitting is similar to KK62, but is used to set up the upright at an angle between 45° to 60°. This fitting should only be subjected to light loads, which cannot be positioned at 90° to the applied load. For greater loads or other pipe sizes, a KK62 flange is used and the upright bent to the required angle. Ø indicates diameter of fixing holes.
| Part | Weight | A | D | E | F | G | H | diameter of fixing holes |
| 63-6 | 2 lbs. | 6 | 2.99 in. | 5 in. | 3.62 in. | 3.74 in. | 0.31 in. | 0.55 in. |
| 63-7 | 2.57 lbs. | 7 | 2.99 in. | 5.43 in. | 3.74 in. | 4.17 in. | 0.39 in. | 0.55 in. |
| 63-8 | 3.37 lbs. | 8 | 3.5 in. | 6.1 in. | 3.94 in. | 4.53 in. | 0.39 in. | 0.55 in. |