Shopping Cart (
PR53 - 24" High Booth Divider Post
PR53 Divider Booth Posts are made of brass or 304 grade stainless steel, are made of 1-1/2” round tube, have a height of 24”, and are designed to hold ¼” thick panels. Each post comes with a half-ball end cap on top, a round flange attached at the bottom, and one or two u-channels that hold the panels in place. PR53 does not have a stopper at the bottom of the channel and therefore allows the panel to rest on the flange. Maximum center-to-center post spacing is 4 feet. Material Care: For Brass: maintain a polished finish with metal polish, item# 00202. Apply with a soft, damp cloth. For Stainless Steel: maintain with stainless steel cleaner and protectant, item# CAE-ZCleankIT. Consult local building codes for rail height, wall offset and other requirements. Call toll free at 877-810-4116 to speak with a product specialist.
1
PR53 Divider Booth Posts are made of brass or 304 grade stainless steel, are made of 1-1/2” round tube, have a height of 24”, and are designed to hold ¼” thick panels. Each post comes with a half-ball end cap on top, a round flange attached at the bottom, and one or two u-channels that hold the panels in place.
PR53 does not have a stopper at the bottom of the channel and therefore allows the panel to rest on the flange.
Maximum center-to-center post spacing is 4 feet.
Material Care:
For Brass: maintain a polished finish with metal polish, item# 00202. Apply with a soft, damp cloth.
For Stainless Steel: maintain with stainless steel cleaner and protectant, item# CAE-ZCleankIT.
Consult local building codes for rail height, wall offset and other requirements.
Call toll free at 877-810-4116 to speak with a product specialist.