Shopping Cart (
KK18 - Internal Coupling
| Material/Finish: Galvanized Steel |
An internal spigot providing a flush joint between two pipes of the same diameter. Not as strong as KK14 and must not be used where a direct tensile load is applied. This fitting can only be used with Schedule 40 steel pipe. Danger: KK18 fitting must not be used as a load bearing joint.
| Part | Weight | A | D | E |
| 18-6 | 0.57 lbs. | 6 | 2.99 in. | 0.79 in. |
| 18-7 | 0.84 lbs. | 7 | 2.99 in. | 0.79 in. |
| 18-8 | 1.19 lbs. | 8 | 3.74 in. | 0.79 in. |
1
| Material/Finish | Pipe Size | SKU | MFR Part No | Description | Price | Qty | Unit | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Galvanized Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1" IPS | KK18-6 Ships within 24-48 hours, Local pickup available | 18-6 |
[KK18-6] KK18 - Internal Coupling (1" IPS)
Spec Sheet
|
$ 27.71 |
EACH |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1-1/4" IPS | KK18-7 Ships within 24-48 hours, Local pickup available | 18-7 |
[KK18-7] KK18 - Internal Coupling (1-1/4" IPS)
Spec Sheet
|
$ 37.27 |
EACH |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1-1/2" IPS | KK18-8 Ships within 24-48 hours, Local pickup available | 18-8 |
[KK18-8] KK18 - Internal Coupling (1-1/2" IPS)
Spec Sheet
|
$ 58.41 |
EACH |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
An internal spigot providing a flush joint between two pipes of the same diameter. Not as strong as KK14 and must not be used where a direct tensile load is applied. This fitting can only be used with Schedule 40 steel pipe. Danger: KK18 fitting must not be used as a load bearing joint.
| Part | Weight | A | D | E |
| 18-6 | 0.57 lbs. | 6 | 2.99 in. | 0.79 in. |
| 18-7 | 0.84 lbs. | 7 | 2.99 in. | 0.79 in. |
| 18-8 | 1.19 lbs. | 8 | 3.74 in. | 0.79 in. |