Shopping Cart (
A200ID - 2" IPS Schedule 40 Pipe in Steel, Galvanized Steel, Aluminum
| Pipe Size: 2" IPS |
Product Description
The A200ID 2" IPS Pipe Schedule 40 is designed for railing systems and structural assemblies requiring compatibility with slip-on fittings. This product is available in both aluminum and galvanized steel, allowing flexibility based on application requirements and environment.
This pipe is measured using IPS pipe size, meaning the nominal size refers to the inside diameter rather than the outside. Always reference the IPS pipe size carefully to ensure proper fit with compatible fittings.
Schedule 40 pipe is commonly used in railing systems and frameworks where consistent sizing and reliable performance are required. Aluminum versions are compatible with Hollaender Speed-Rail® fittings, while galvanized steel versions are designed for use with galvanized steel slip-on fittings.
Key Features
- 2" IPS Schedule 40 pipe
- Available in aluminum and galvanized steel
- Aluminum: compatible with Hollaender Speed-Rail® fittings
- Galvanized steel: designed for use with galvanized steel slip-on fittings
- Compatible with pipe of matching IPS pipe size (verify before ordering)
- Consistent dimensions for use in railing and structural systems
- Suitable for interior and exterior applications depending on material selection
Common Applications
- Hand railing systems
- Safety and guardrail assemblies
- Bar (foot) railing
- Industrial frameworks
- Queue and crowd control systems
- Custom structural fabrication
Specs / Compatibility
- Nominal Size: 2" IPS
- Outside Diameter: 2.375" (60.33 mm)
- Inside Diameter: 2.067" (52.50 mm)
- Wall Thickness: 0.154" (3.91 mm)
- Material options: aluminum or galvanized steel
- Aluminum alloys: 6063-T6 / 6463-T6
- Galvanized steel: manufactured per ASTM A53
- Schedule: 40
- Measured by IPS pipe size
- Compatible with fittings designed for matching IPS sizes
- Note: Confirm correct IPS pipe size before ordering for proper fit
What’s Included / Hardware
- Pipe length as specified
- No fittings or connectors included
Care & Maintenance
- Maintenance varies by material (aluminum or galvanized steel)
- Clean with appropriate non-abrasive cleaners
- Inspect periodically in high-use or outdoor environments
Shipping & Availability
- Standard lengths vary by material and finish; refer to product options for available sizes
- Lengths up to 8 ft ship via parcel carriers
- Lengths over 8 ft ship via LTL freight (truck)
- Custom cut lengths just under 8 ft may be available
- Please verify the correct IPS pipe size before purchase to ensure compatibility
Need Help
Need help selecting the correct pipe material or size? Visit our Contact Us page or call to speak with a specialist for guidance on compatibility and application requirements.
1
Product Description
The A200ID 2" IPS Pipe Schedule 40 is designed for railing systems and structural assemblies requiring compatibility with slip-on fittings. This product is available in both aluminum and galvanized steel, allowing flexibility based on application requirements and environment.
This pipe is measured using IPS pipe size, meaning the nominal size refers to the inside diameter rather than the outside. Always reference the IPS pipe size carefully to ensure proper fit with compatible fittings.
Schedule 40 pipe is commonly used in railing systems and frameworks where consistent sizing and reliable performance are required. Aluminum versions are compatible with Hollaender Speed-Rail® fittings, while galvanized steel versions are designed for use with galvanized steel slip-on fittings.
Key Features
- 2" IPS Schedule 40 pipe
- Available in aluminum and galvanized steel
- Aluminum: compatible with Hollaender Speed-Rail® fittings
- Galvanized steel: designed for use with galvanized steel slip-on fittings
- Compatible with pipe of matching IPS pipe size (verify before ordering)
- Consistent dimensions for use in railing and structural systems
- Suitable for interior and exterior applications depending on material selection
Common Applications
- Hand railing systems
- Safety and guardrail assemblies
- Bar (foot) railing
- Industrial frameworks
- Queue and crowd control systems
- Custom structural fabrication
Specs / Compatibility
- Nominal Size: 2" IPS
- Outside Diameter: 2.375" (60.33 mm)
- Inside Diameter: 2.067" (52.50 mm)
- Wall Thickness: 0.154" (3.91 mm)
- Material options: aluminum or galvanized steel
- Aluminum alloys: 6063-T6 / 6463-T6
- Galvanized steel: manufactured per ASTM A53
- Schedule: 40
- Measured by IPS pipe size
- Compatible with fittings designed for matching IPS sizes
- Note: Confirm correct IPS pipe size before ordering for proper fit
What’s Included / Hardware
- Pipe length as specified
- No fittings or connectors included
Care & Maintenance
- Maintenance varies by material (aluminum or galvanized steel)
- Clean with appropriate non-abrasive cleaners
- Inspect periodically in high-use or outdoor environments
Shipping & Availability
- Standard lengths vary by material and finish; refer to product options for available sizes
- Lengths up to 8 ft ship via parcel carriers
- Lengths over 8 ft ship via LTL freight (truck)
- Custom cut lengths just under 8 ft may be available
- Please verify the correct IPS pipe size before purchase to ensure compatibility
Need Help
Need help selecting the correct pipe material or size? Visit our Contact Us page or call to speak with a specialist for guidance on compatibility and application requirements.