Shopping Cart (
A112ID-80 - 1-1/2" IPS Pipe Schedule 80
| Pipe Schedule: Schedule 80 |
| Pipe Size: 1-1/2" IPS |
Product Description
The A112ID-80 1-1/2" IPS Pipe Schedule 80 is designed for railing systems and structural assemblies requiring increased wall thickness and strength. This product is available in both aluminum and galvanized steel, allowing selection based on application requirements and environmental conditions.
This pipe is measured using IPS pipe size, meaning the nominal size refers to the inside diameter rather than the outside. Always reference the IPS pipe size carefully to ensure proper fit with compatible fittings.
Schedule 80 pipe features a thicker wall than Schedule 40, providing additional strength and rigidity for more demanding applications. Aluminum versions are compatible with Hollaender Speed-Rail® fittings, while galvanized steel versions are designed for use with galvanized steel slip-on fittings.
Key Features
- 1-1/2" IPS Schedule 80 pipe
- Available in aluminum and galvanized steel
- Aluminum: compatible with Hollaender Speed-Rail® fittings
- Galvanized steel: designed for use with galvanized steel slip-on fittings
- Compatible with pipe of matching IPS pipe size (verify before ordering)
- Thicker wall for increased strength and durability
- Suitable for interior and exterior applications depending on material
Common Applications
- Hand railing systems
- Safety and guardrail assemblies
- Industrial frameworks
- Bar (foot) railing
- Queue and crowd control systems
- Structural applications requiring higher load capacity
Specs / Compatibility
- Nominal Size: 1-1/2" IPS
- Outside Diameter: 1.90" (48.26 mm)
- Inside Diameter: 1.50" (38.10 mm)
- Wall Thickness: 0.20" (5.08 mm)
- Material options: aluminum or galvanized steel
- Aluminum alloys: 6063-T6, 6463-T6, 6061
- Schedule: 80
- Measured by IPS pipe size
- Compatible with fittings designed for matching IPS sizes
- Note: Confirm correct IPS pipe size before ordering for proper fit
What’s Included / Hardware
- Pipe length as specified
- No fittings or connectors included
Care & Maintenance
- Maintenance varies by material (aluminum or galvanized steel)
- Clean with appropriate non-abrasive cleaners
- Inspect periodically in high-use or outdoor environments
Shipping & Availability
- Standard lengths vary by material and finish; refer to product options for available sizes
- Lengths up to 8 ft ship via parcel carriers
- Lengths over 8 ft ship via LTL freight (truck)
- Custom cut lengths just under 8 ft may be available
- Please verify the correct IPS pipe size before purchase to ensure compatibility
Need Help
Need help selecting the correct pipe material, size, or schedule? Visit our Contact Us page or call to speak with a specialist for guidance on compatibility and application requirements.
1
Product Description
The A112ID-80 1-1/2" IPS Pipe Schedule 80 is designed for railing systems and structural assemblies requiring increased wall thickness and strength. This product is available in both aluminum and galvanized steel, allowing selection based on application requirements and environmental conditions.
This pipe is measured using IPS pipe size, meaning the nominal size refers to the inside diameter rather than the outside. Always reference the IPS pipe size carefully to ensure proper fit with compatible fittings.
Schedule 80 pipe features a thicker wall than Schedule 40, providing additional strength and rigidity for more demanding applications. Aluminum versions are compatible with Hollaender Speed-Rail® fittings, while galvanized steel versions are designed for use with galvanized steel slip-on fittings.
Key Features
- 1-1/2" IPS Schedule 80 pipe
- Available in aluminum and galvanized steel
- Aluminum: compatible with Hollaender Speed-Rail® fittings
- Galvanized steel: designed for use with galvanized steel slip-on fittings
- Compatible with pipe of matching IPS pipe size (verify before ordering)
- Thicker wall for increased strength and durability
- Suitable for interior and exterior applications depending on material
Common Applications
- Hand railing systems
- Safety and guardrail assemblies
- Industrial frameworks
- Bar (foot) railing
- Queue and crowd control systems
- Structural applications requiring higher load capacity
Specs / Compatibility
- Nominal Size: 1-1/2" IPS
- Outside Diameter: 1.90" (48.26 mm)
- Inside Diameter: 1.50" (38.10 mm)
- Wall Thickness: 0.20" (5.08 mm)
- Material options: aluminum or galvanized steel
- Aluminum alloys: 6063-T6, 6463-T6, 6061
- Schedule: 80
- Measured by IPS pipe size
- Compatible with fittings designed for matching IPS sizes
- Note: Confirm correct IPS pipe size before ordering for proper fit
What’s Included / Hardware
- Pipe length as specified
- No fittings or connectors included
Care & Maintenance
- Maintenance varies by material (aluminum or galvanized steel)
- Clean with appropriate non-abrasive cleaners
- Inspect periodically in high-use or outdoor environments
Shipping & Availability
- Standard lengths vary by material and finish; refer to product options for available sizes
- Lengths up to 8 ft ship via parcel carriers
- Lengths over 8 ft ship via LTL freight (truck)
- Custom cut lengths just under 8 ft may be available
- Please verify the correct IPS pipe size before purchase to ensure compatibility
Need Help
Need help selecting the correct pipe material, size, or schedule? Visit our Contact Us page or call to speak with a specialist for guidance on compatibility and application requirements.