Shopping Cart (
54-5 - 5" Offset Wall Flange
| Pipe Size: 1-1/2" IPS |
Product Description
The Hollaender Speed-Rail® 54-5 – 5" Offset Wall Flange is a slip-on mounting flange designed to attach a pipe securely to a vertical surface while providing a fixed 5" offset from the wall to the center of the pipe. This extended stand-off is ideal for applications requiring additional clearance to meet code requirements, bypass obstructions, or align with adjacent railing components.
This is not a pass-through fitting—the pipe terminates inside the barrel and cannot extend through the bracket. The flange mounts directly to the wall or other vertical surface using the four pre-drilled mounting holes (mounting hardware not included). Built from corrosion-resistant aluminum-magnesium alloy and secured with zinc-plated set screws, the 54-5 provides long-lasting performance in architectural, commercial, and industrial environments. Installers should consult local building codes for required railing offsets, clearances, and height specifications. Always confirm the correct IPS pipe size before ordering.
Key Features
- Provides a fixed 5" offset from wall to pipe centerline
- Not a pass-through bracket—pipe does not protrude through the base
- Four-hole mounting plate ensures secure wall attachment
- Slip-on installation—no welding or threading required
- Constructed from corrosion-resistant aluminum-magnesium alloy
- Secured with zinc-plated set screws
- Ideal for indoor or outdoor use
- Fully compatible with Hollaender Speed-Rail® modular pipe systems
Common Applications
- Handrails requiring a 5" stand-off from the wall
- Guardrails and safety rails needing additional clearance
- Architectural framing or retrofit applications requiring extended offset
- Wall-mounted pipe systems that must clear pipes, conduits, or other obstructions
- Industrial or commercial railing systems
Specs / Compatibility
- Fitting Type: Offset Wall Flange (54-5)
- Offset: 5" from wall to pipe centerline
- Material: Aluminum-Magnesium Alloy 535
- Finish: Natural Aluminum-Magnesium
- Mounting: Four-hole wall plate (mounting bolts not included)
- Connection: Slip-on barrel with zinc-plated set screws
- Code Note: Consult local building codes for required wall offset and railing height
- Note: Verify correct IPS pipe size before ordering
What’s Included / Hardware
- One Hollaender Speed-Rail® 54-5 Offset Wall Flange
- Zinc-plated set screws included
- Note: Wall mounting hardware not included
Care & Maintenance
Clean periodically using mild soap and water. Inspect and retighten set screws as needed. Avoid abrasive cleaners that may damage the aluminum-magnesium finish.
Shipping & Availability
Ships via UPS or FedEx with quick processing. Always confirm the correct IPS pipe size before ordering to ensure proper fit.
Need Help?
Need help choosing the right part? Visit our Contact Us page or call to speak with a specialist.
1
| Material/Finish | Pipe Size | SKU | MFR Part No | Description | Price | Qty | Unit | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Aluminum Satin Anodized | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Aluminum Satin Anodized [28356] 54-5 - 5" Offset Wall Flange (Aluminum Satin Anodized) |
1-1/2" IPS | 28356 Ships within 24-48 hours, Local pickup available |
[28356] 54-5 - 5" Offset Wall Flange (Aluminum Satin Anodized)
Spec Sheet
|
$ 97.46 |
EACH |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Aluminum Magnesium | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1-1/2" IPS | 28350 Ships within 24-48 hours, Local pickup available | 54-5-8 |
[28350] 54-5 - 5" Offset Wall Flange (Aluminum Magnesium)
Spec Sheet
|
$ 82.19 |
EACH |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Description
The Hollaender Speed-Rail® 54-5 – 5" Offset Wall Flange is a slip-on mounting flange designed to attach a pipe securely to a vertical surface while providing a fixed 5" offset from the wall to the center of the pipe. This extended stand-off is ideal for applications requiring additional clearance to meet code requirements, bypass obstructions, or align with adjacent railing components.
This is not a pass-through fitting—the pipe terminates inside the barrel and cannot extend through the bracket. The flange mounts directly to the wall or other vertical surface using the four pre-drilled mounting holes (mounting hardware not included). Built from corrosion-resistant aluminum-magnesium alloy and secured with zinc-plated set screws, the 54-5 provides long-lasting performance in architectural, commercial, and industrial environments. Installers should consult local building codes for required railing offsets, clearances, and height specifications. Always confirm the correct IPS pipe size before ordering.
Key Features
- Provides a fixed 5" offset from wall to pipe centerline
- Not a pass-through bracket—pipe does not protrude through the base
- Four-hole mounting plate ensures secure wall attachment
- Slip-on installation—no welding or threading required
- Constructed from corrosion-resistant aluminum-magnesium alloy
- Secured with zinc-plated set screws
- Ideal for indoor or outdoor use
- Fully compatible with Hollaender Speed-Rail® modular pipe systems
Common Applications
- Handrails requiring a 5" stand-off from the wall
- Guardrails and safety rails needing additional clearance
- Architectural framing or retrofit applications requiring extended offset
- Wall-mounted pipe systems that must clear pipes, conduits, or other obstructions
- Industrial or commercial railing systems
Specs / Compatibility
- Fitting Type: Offset Wall Flange (54-5)
- Offset: 5" from wall to pipe centerline
- Material: Aluminum-Magnesium Alloy 535
- Finish: Natural Aluminum-Magnesium
- Mounting: Four-hole wall plate (mounting bolts not included)
- Connection: Slip-on barrel with zinc-plated set screws
- Code Note: Consult local building codes for required wall offset and railing height
- Note: Verify correct IPS pipe size before ordering
What’s Included / Hardware
- One Hollaender Speed-Rail® 54-5 Offset Wall Flange
- Zinc-plated set screws included
- Note: Wall mounting hardware not included
Care & Maintenance
Clean periodically using mild soap and water. Inspect and retighten set screws as needed. Avoid abrasive cleaners that may damage the aluminum-magnesium finish.
Shipping & Availability
Ships via UPS or FedEx with quick processing. Always confirm the correct IPS pipe size before ordering to ensure proper fit.
Need Help?
Need help choosing the right part? Visit our Contact Us page or call to speak with a specialist.