|
|
A112ID
1-1/2" IPS Aluminum Pipe Schedule 40
 E-mail this product to a friend
|
   |
• NEW Bright Dip Anodizing (Rust prevention characteristic in salt water)
The pipe is made of aluminum. The aluminum is a 6063 alloy with a T5 hardness rating.
• Aluminum Slip-On Pipe Fittings and Pipe Speed Rail(R)
• Aluminum Slip-On Pipe Fittings and Pipe Speed Rail(R)
• Fittings are as strong as malleable iron but only 1/3 the weight.
• Aluminum Alloy fittings can be used with galvanized carbon steel, stainless steel, black iron, or aluminum pipe, with no electrolytic corrosion.
• Can be safely constructed around operating machinery with just a standard hex key.
• Proprietary Internal/External Reverse Knurl Cup set screws drastically reduce loosening caused by vibration and resist pull-out and rotational slip.
• All pipe is anodized aluminum.OSHA, IBC, BOCA, SBC, and UBC compliant nonmagnetic, nonsparking, corrosion-resistantAluminum Pipe, Schedule 40 Type, Nominal Pipe Size 1-1/2 Inch, Standards OSHA, BOCA, SBC and UBC, Aluminum, Internal/External Set Screw, Material Tensile Strength 30,000psi Lb, Resists Corrosion.
|
|
Aluminum Anodized |
Select feet |
|
1-1/2" IPS |
|
|
|
|
|
50-A112ID Ships within 24-48 hours
Local pickup available
|
1-1/2" IPS Anodized Aluminum Pipe Schedule 40 (1.610" ID - 1.900" OD - 0.145" Wall) |
|
|
Aluminum Bright Dip |
Select feet |
|
1-1/2" IPS |
|
|
|
|
|
52-A112ID Ships within 24-48 hours
Local pickup available
|
1-1/2" IPS Bright Dip Aluminum Pipe Schedule 40 (1.610" ID - 1.900" OD - 0.145" Wall) |
|
|
Aluminum Mill Finish |
Select feet |
|
1-1/2" IPS |
|
|
|
|
|
51-A112ID Ships within 24-48 hours
Local pickup available
|
1-1/2" IPS Aluminum Mill Finish Pipe Schedule 40 (1.610" ID - 1.900" OD - 0.145" Wall) |
|
|
|
|
