|
|
KK63
Angle Base Flange
 E-mail this product to a friend
|
   |
This fitting is similar to KK62, but is used to set up the upright at an angle between 45° to 60°. This fitting should only be subjected to light loads, which cannot be positioned at 90° to the applied load. For greater loads or other pipe sizes, a KK62 flange is used and the upright bent to the required angle. Ø indicates diameter of fixing holes.
| Part |
Weight |
A |
D |
E |
F |
G |
H |
diameter of fixing holes |
| 63-6 |
2 lbs. |
6 |
2.99 in. |
5 in. |
3.62 in. |
3.74 in. |
0.31 in. |
0.55 in. |
| 63-7 |
2.57 lbs. |
7 |
2.99 in. |
5.43 in. |
3.74 in. |
4.17 in. |
0.39 in. |
0.55 in. |
| 63-8 |
3.37 lbs. |
8 |
3.5 in. |
6.1 in. |
3.94 in. |
4.53 in. |
0.39 in. |
0.55 in. |
|
|
Galvanized Steel |
|
1" IPS |
|
|
|
|
63-6 |
KK63-6 Ships in 1-2 days
|
Variable Angle Base Galvanized Steel 1" IPS (1.38" ID) |
|
|
|
|
1-1/4" IPS |
|
|
|
|
63-7 |
KK63-7 Ships in 1-2 days
|
Variable Angle Base Galvanized Steel 1-1/4" IPS (1.72" ID) |
|
|
|
|
1-1/2" IPS |
|
|
|
|
63-8 |
KK63-8 Ships within 24-48 hours
Local pickup available
|
Variable Angle Base Galvanized Steel 1-1/2" IPS (1.94" ID) |
|
|
|
|
